Industrial trash compactors, commercial trash compactors from KenBay compaction equipment - waste compactors for industrial waste disposal

Capabilities -- KenBay Saves You Hauling and Labor Costs !
Improve safety by reducing floor traffic Save carting and handling labor costs Maintain clean disposal areas Reduces waste and disposal costs No wait for recycle Requires no supervision of skilled operator No installation costs Training and maintenance is minimal

High ROI Uses
Users of the the KenBay RotoPac compactor vary throughout the world from; compacting electronic components, to expired medicines, to metal shavings, to improperly baked bread.
Yet, the three most common uses in hundreds of companies are compacting general trash, paper (much of which is corrugated) and plastic.

Production workers extracting parts to be assembled at the beginning of an assembly line are able to throw the empty boxes and/or packing materials into a RotoPac compactor. It is the last time anyone will need to handle the waste. No gaylords, no bins, no receptacles. Just straight into the RotoPac . Save valuable floor space, reduce labor hauling waste, eliminate waste around disposal areas and more importantly significantly lower hauling costs.

The RotoPac's high compaction ratio makes it ideal for many recycling plans.

General Trash: Remove the barrel, gaylord or dumpster you're currently putting your general waste in and replace it with the space saving RotoPac. With only a 4' X 5' footprint, the RotoPac sits at the source of your waste, continuously compacting at an on average compaction ratio of 6 to 1.

Cardboard and Paper: Just throw cardboard boxes in the RotoPac and walk away. No breaking down, no staging area, no carting boxes to specified areas to accumulate, reduce forklift traffic. After the full compaction cycle all that's left is a plastic bag weighing roughtly 750 lbs. Keep the sealed bag either inside or out and in the process clean up your facility, leaving a safer work environment.

Plastic: The procedure for plastic is similar to cardboard and paper except that the bagged plastic will weight less, probably about 500 lbs per bag. The RotoPac also excels in the time consuming task of compacting of plastic wrap.

Getting Waste/Recyclables into the Compactor

Manual Feed through the Loading Door: The RotoPac has three modes of activation: 1) push the run button and compaction will start and continue on for whatever timer is set at (between one and twelve minutes), 2) with an auto-restart kit installed, the RotoPac can be set to automatically engage for a preset time, e.g., 5 minutes and will rest for a preset time, 3) with heavy continuous waste, users engage the RotoPac continuously.

From a Conveyor Belt: The RotoPac is able to continuously accept waste, including recyclable materials through the top opening via a conveyor.

Through Pneumatic Systems: Used in a number of different applications, the RotoPac is able to accept material through the top via a pneumatic system. It is especially prevalent in the printing industries to collect run-off from saddle stichers and trimmers.

Gravity Feed Through a Chute: A number of companies have placed the RotoPac on their factory floor and fed waste into the compactor using a chute located on an upper floor. With an additional set of controls, a worker can operate the machine remotely


GSA Contract # GS-07F-0339V